I was able to cut away at the plastic in a way that aligns the carbon fiber arms with the natural screw holes used by the toaster case itself. With only one screw per arm, they don’t move in any direction.
![](https://blog.armware.net/wp-content/uploads/2019/09/20190921_1812397031107722028674243-768x1024.jpg)
I’ve also found that the Runcam will fit very well where the knob currently is:
![](https://blog.armware.net/wp-content/uploads/2019/09/20190921_1813076833074104532052365-768x1024.jpg)
![](https://blog.armware.net/wp-content/uploads/2019/09/20190921_181315-1024x768.jpg)