Flying Toaster Gets Components
Finally found a great place to mount the VTX, and a decent place to mount the flight controller. The receiver and two of the ESC’s are soldered in, but I’ll …
Flying Toaster Gets Arms
I was able to cut away at the plastic in a way that aligns the carbon fiber arms with the natural screw holes used by the toaster case itself. With …
De-docker Grafana Installation
While docker is a fantastically powerful tool, as it turns it out, it’s not perfect for everything everywhere. I ran into this recently and needed to move my Grafana setup …
RFID/HID Card Explorations
Going through my collection of random circuit boards I came across a 125KHz RFID reader that I had forgotten about, so I started playing with it. At first I wired …